Caller Line Identification Presentation (CLIP)
This
feature helps you to identify the caller by displaying the number on
the handset. Since you know the caller's identity, you can respond
suitably, depending on the importance of the call. You can return the
call later in case you are unable to answer immediately. The service
is provided free of cost on all bill plans except the Standard Bill
Plan, where it is charged about Rs.75/- per month in Mumbai.
Caller Line Identification Restriction (CLIR):
This feature enables you to restrict your cellular number from being
displayed on the receiver's cellular phone. It helps you maintain
complete confidentiality of your number. The service can be obtained
at an additional cost of about Rs.75/- per month in Mumbai.
Call Waiting / Call Hold:
This feature allows you to receive another call when you are already
answering or making a call. You get a beep indicating an incoming
call. Using the 'SEND' button you can receive the call by placing the
first caller on hold. You can switch between these two calls using the
same button. You will be charged airtime for both the calls. The
service can be obtained at an additional cost of about Rs.75/- per
month in Mumbai.
Call Conference:
This feature allows you to speak with five people at the same time
from wherever you are. It is just perfect for times when teamwork
matters so much to job success. You can have a conference with either
cellular or landline phones including STD and ISD calls. All calls
will have to be initiated by you. All your calls will be charged the
Airtime and DoT charges as applicable. The service can be obtained at
no additional cost in Mumbai.
Call Divert:
This feature allows you to divert an incoming call to a landline or to
any AT & T cellular. This way you don't miss out on any important
incoming calls. Calls can be diverted when you are busy, unavailable
or traveling. The call can be diverted to any landline or cellular
within the AT&T network area. Calls cannot be diverted to a cellular
of another service provider. The service can be obtained at no
additional cost in Mumbai.
Call Barring:
This feature allows you to bar incoming and outgoing calls using a
four-digit password selected by you. This is a security measure to
prevent the possible misuse of your cellular phone. This feature will
work only if the Call Divert feature is de-activated. You can
selectively bar all incoming calls or all outgoing calls as well as
outgoing ISD calls. You cannot selectively bar outgoing STD calls. The
service can be obtained at an additional cost of about Rs.75/- per
month in Mumbai.
Short Messaging Services (SMS):
The Short Messaging Service allows you to keep in touch with your
colleagues, associates, clients who are customers & currently are
outside the coverage area at the time of your calling them. Standard
messages created by you can be stored in your handset and sent as
required. Just pay a Re. 1 for local sms, Rs. 2 for National sms and
Rs. 5 for International sms in Mumbai under a post paid plan.
Detailed billing:
A detailed statement of your calls from your cellular phone, the call
duration and the applicable charges can be sought. This is the most
comprehensive billing statement for a person who values both time and
money. The service can be obtained at an additional cost of about
Rs.75/- per month in Mumbai.
WAP:
The latest innovation in mobile telephony, it enables the user to
browse the Internet on his handset screens however, handsets which are
WAP unabled are required for using this service.
Network Circle Coverage (NCC):
This allows subscribers to call a PSTN number in any district
headquarters and adjacent area, as defined by DoT, irrespective of
distance but within network, at airtime charges plus local DoT access
rates only, thereby, saving on DoT inter-city STD charges. Any
subscriber who doesn't apply for the NCC feature would be billed for
inter-city STD charges (as per DoT rates) and applicable airtime rates
for calls made from mobile on PSTN outside the SDCA location of the
originating call.
Cellular 2 Cellular (C2C):
Customers opting for C2C would be eligible for the following
subsidised airtime rates from cellular to cellular within the service
provider's local network. Outgoing cellular to cellular would be
charged. Incoming calls from cellular to cellular (within the network
of the service provider) is FREE for some users (as may be offered by
the service provider) in Mumbai.
Monthly Access:
A monthly charge for the ability to connect to a wireless service
provider. This fee is assessed monthly whether the phone is actually
used or not.
Off-Peak Period:
Most service providers define the off peak period as nights and
weekends. Network service providers tend to offer lower rates during
these periods when network demand is low.
Peak Period:
Most service providers define the peak period as weekdays between
9:00am to 9:00pm. Network service providers tend to offer higher rates
during this period when there are high levels of communications
traffic on the system.
Peak Minute:
Many service providers offer a package of minutes, which can be used
only during the peak periods.
Off-peak Minute:
Many service providers offer a package of minutes which can be used
only during the off peak periods.
Anytime, Anywhere Minutes:
Many service providers offer a package of minutes, which can be used
during both peak and off-peak periods.
Contract:
Many network service providers offer service plans that include a one,
two or three year commitment. Carriers often offer discounts on
wireless phones if you subscribe to a service plan with a contract.
Rate per Additional Minute:
Many service plans offer a package of minutes per month. Once the
subscriber surpasses the allotted minutes in a month, they will be
charged a fee for each additional minute of use.
Regional Roaming:
In some cases, there is an additional charge for placing a call
outside of the local calling area.
National Roaming:
In some cases, there is an additional charge for placing a call
outside of the home state calling area.
Prepaid Cellular:
A system allowing subscribers to pay in advance for wireless service.
Prepaid is generally used for credit-impaired customers or those who
want to adhere to a budget. But the per/minute calls are also charged
at a higher rate.
BILL EXPLANATION
Airtime Charges:
This includes the airtime charges for the current month in minutes and
seconds. Remember this also includes the minutes used in Call Divert.
DoT Charges:
This is given in pulses and each pulse is charged at the applicable
DoT rate.
Roaming Charges:
The amount of airtime and DoT charges incurred while using National
Coverage (Automatic Roaming) facility.
Home Usage Taxes:
A 5% service tax levied on the entire bill amount. It is applicable on
everything except deposits and SIM processing charges. In the first
bill it is applicable on the SIM activation fee.
Roaming Usage Taxes:
This shows the tax amount on all outgoing calls while roaming. 15%
charged on airtime. If it is an outgoing call, 15% on airtime +
Local/STD pulse and if, an incoming call, 15% on airtime only.
Itemised Call Detail:
Shows time, destination, duration and total charge for each call made
or received. This is further divided into local, STD and ISD call
details. Detailed billing is given if opted for by you at charge of Rs.
75.
STD and ISD Call Charges:
This itemises the ISD and STD calls made during the billing period.
These will be attached to your bill. |